Friday, January 31, 2014

GENERAL STUDIES...

India became third largest crude oil importer in the World
          India overtook Japan to become the third largest crude oil importer in the World. As per the data released by Reuters on 30 January 2014, India imported 3.86 million barrels-per-day of crude oil in the year 2013.

India's crude oil imports were nearly 6 percent higher than Japan's customs-cleared imports of 3648372 barrels-per-day (211716710 kilolitres).

Recently, China had overtaken USA to become the world’s largest importer of crude oil. 

World’s Top Five Oil-Importing Countries

1.    China: China imports 6.30 million barrels per day
2.    U.S.A: USA imports 6.24 million barrels per day
3.    India: India imports 3.86 million barrels per day
4.    Japan: Japan imports 3.64 million barrels per day
5.    Germany: Germany imports 2.67 million barrels per day

Thursday, January 30, 2014

ECONOMICS ..



What is Inflation or What is the meaning of Inflation :

In economics inflation means, a rise in general level of prices of goods and services in a economy over a period of time.   When the general price level rises, each unit of currency buys fewer goods and services.  Thus, inflation results in loss of value of money.   Another popular way of looking at inflation is "toomuch money chasing too few goods".   The last definition attributes the cause of inflation to monetary growth relative to the output / availability of goods and services in the economy.

In case the price of say only one commodity rise sharply but prices of other commodities fall, it will not be termed as inflation.  Similarly, in case due to rumors if the price of a commodity rise during the day itself, it will not be termed as inflation.

What are different types of inflation :

Broadly speaking inflation is divided into two categoires i.e.

(a) DEMAND - PULL INFLATION:
                             In this type of inflation prices increase results  from an excess of demand over supply for the economy as a whole. Demand inflation occurs when supply cannot expand any more to meet demand; that is, when critical production factors are being fully utilized, also called Demand inflation.

(b) COST - PUSH INFLATION:
                          This type of inflation occurs when general price levels rise owing to rising input costs. In general, there are three factors that could contribute to Cost-Push inflation: rising wages, increases in corporate taxes, and imported inflation. [imported raw or partly-finished goods may become  expensive due to rise in international costs or as a result of  depreciation of local currency ]


What is Deflation ? :

Deflation is the opposite of inflation.   Deflation refers to  situation, where there is decline in general price levels.   Thus, deflation occurs when the inflation rate falls below 0% (or it is negative inflation rate).   Deflation increases the real value of money and allows one to buy more goods with the same amount of money over time.   Deflation can occur owing to reduction in the supply of money or credit.   Deflation can also occur due to  direct contractions in spending, either in the form of a reduction in government spending, personal spending or investment spending. Deflation has often had the side effect of increasing unemployment in an economy, since the process often leads to a lower level of demand in the economy.


What is Stagflation :

Stagflation refers to economic condition where economic growth is very slow or stagnant and prices are rising.  The term stagflation was coined by British politician Iain Macleod, who used the phrase in his speech to parliament in 1965, when he said: “We now have the worst of both worlds - not just inflation on the one side or stagnation on the other. We have a sort of ‘stagflation’ situation.”    The side effects of stagflation are increase in  unemployment- accompanied by a rise in prices, or inflation. Stagflation occurs when the economy isn't growing but prices are going up. At international level, this happened during mid 1970s, when world oil prices rose dramatically, fuelling sharp inflation in developed countries.


What is Hyperinflation :

Hyperinflation is a situation where the price increases are too sharp.  Hyperinflation often occurs when there is a large increase in the money supply, which is  not supported by growth  in Gross Domestic Product (GDP).  Such a situation results  in an imbalance in the supply and demand for the money.  In this this remains  unchecked;  it results into sharp increase in prices and depreciation of the domestic  currency.





What is Headline Inflation

Headline inflation refers to inflation figure which is not adjusted for seasonality or for the often volatile elements of food & energy prices, which are removed in the Core CPI. Headline inflation will usually be quoted on an annualized basis, meaning that a monthly headline figure of 4% inflation equates to a monthly rate that, if repeated for 12 months, would create 4% inflation for the year. Comparisons of headline inflation are typically made on a year-over-year basis. Also known as "top-line inflation".

Wednesday, January 29, 2014

INVESTMENT BY INDIA ..


Top spot in terms of investment locations in India 
since 2000, the inflow of foreign direct investment was U.S. $ 306 billion
 


India's foreign direct investment since 2000 to U.S. $ 306.88 (ADI) is obtained. 94 percent of the total amount of foreign investment has gained during the past nine years. India's foreign direct investment policy more favorable to the investor has made ​​it more generous.In some areas, the government's recent review of regional policy to prevent and / or the modification made. These are - Petroleum and Natural Gas, Commodity Exchange, Power Exchange, stock exchanges, depositories and clearing corporations, asset reconstruction company, Credit Information Co., Tea - Tea sector including plantations, single brand product retail trading, test marketing, telecom services, Courier services and defense. 100 percent FDI in telecom has been cleared. Insurance and FDI in the defense sector has been stretched to the limit. 51 percent FDI in multi-brand retail is allowed. Requires a minimum investment of U.S. $ 100 million. FDI within three years after Bekand at least 50 percent will be invested in infrastructure. FDI cap in single brand retail has also been increased to 100 percent. 49 per cent FDI in single brand retail was decided to approve.FDI cap in defense sector is reportedly 26 percent. There have been no changes. This is a result of liberal foreign investment policies in India for three consecutive World has been one of the top investment destinations. World Bank confirms that international institutions such as UNCTAD. These institutions investing in India is placed in the top three spots.This is manifest in the statistics on foreign investment. Foreign investment in India between 1999-2004 was U.S. $ 19.52 billion between 2004-09 which increased to U.S. $ 114.55. And further increases the flow of foreign investment into the country from 2009 to September 2013 the figure rose to U.S. $ 172.82. 


Advantages and Disadvantages of Nanotechnology..


     Advantages of Nanotechnology
To enumerate the advantages and disadvantages of nanotechnology, let us first run through the good things this technology brings:
  • Nanotechnology can actually revolutionize a lot of electronic products, procedures, and applications. The areas that benefit from the continued development of nanotechnology when it comes to electronic products include nano transistors, nano diodes, OLED, plasma displays, quantum computers, and many more.
  • Nanotechnology can also benefit the energy sector. The development of more effective energy-producing, energy-absorbing, and energy storage products in smaller and more efficient devices is possible with this technology. Such items like batteries, fuel cells, and solar cells can be built smaller but can be made to be more effective with this technology.
  • Another industry that can benefit from nanotechnology is the manufacturing sector that will need materials like nanotubes, aerogels, nano particles, and other similar items to produce their products with. These materials are often stronger, more durable, and lighter than those that are not produced with the help of nanotechnology.
  • In the medical world, nanotechnology is also seen as a boon since these can help with creating what is called SMART DRUG. These help cure people faster and without the side effects that other traditional drugs have. You will also find that the research of nanotechnology in medicine is now focusing on areas like tissue regeneration, bone repair, immunity and even cures for such ailments like cancer, diabetes, and other life threatening diseases.

      Disadvantages of Nanotechnology


When we r discussing  the advantages and disadvantages of nanotechnology, you will also need to point out what can be seen as the negative side of this technology:
  • Included in the list of disadvantages of this science and its development is the possible loss of jobs in the traditional farming and manufacturing industry.
  • You will also find that the development of nanotechnology can also bring about the crash of certain markets due to the lowering of the value of oil and diamonds due to the possibility of developing alternative sources of energy that are more efficient and won’t require the use of fossil fuels. This can also mean that since people can now develop products at the molecular level, diamonds will also lose its value since it can now be mass produced.
  • Atomic weapons can now be more accessible and made to be more powerful and more destructive. These can also become more accessible with nanotechnology.
  • Since these particles are very small, problems can actually arise from the inhalation of these minute particles, much like the problems a person gets from inhaling minute asbestos particles.
  • Presently, nanotechnology is very expensive and developing it can cost you a lot of money. It is also pretty difficult to manufacture, which is probably why products made with nanotechnology are more expensive

Wednesday, January 22, 2014

ALL JOB PROFILE IN UPSC..

Indian Administrative Services (IAS)

Indian Foreign Services: IFS

Indian Police Services : IPS

The Indian Defence Accounts Services (IDAS)
The Indian Ordinance And Factories Services (IOFS)
The Indian Civil Accounts Services (ICAS)
The Indian Defence Estates Services (IDES)
The Central Industrial Security Force (CISF)

PLEASE CLICK TO SEE IN DETAIL......

JOBS PROFILES SEE ..........................................(click here).